Rifle bolts, barrels, receivers and stocks

Daniel Defense EZ CAR 7.0 carbine hand guard

The Daniel Defense EZ CAR 7.0 carbine hand guard is a lightweight aluminum replacement for the M4 handguard. The unit mounts on the delta-ring and handguard cap of the M4 or AR15 carbine and is secured with four set screws to prevent movement under recoil and vibration. No permanent alterations to the weapon are required. The EZ CAR has four MIL-STD 1913 Picatinny rails for maximum versatility in accessory mounting. The top rail has 16 slots and the side and bottom rails 15. The top rail fills the gap between the receiver and handguard to provide a near continuous length of rail for optics mounting. The slots are marked to ensure repeatability. The EZ CAR 7 is machined from 6061 T6 aluminum and given a matte black Type III hardcoat anodized finish. The Daniel Defense carbine handguard is 7¼” (18.4cm) long, 27⁄16″ (6.2cm) wide, 27⁄16″ high and weighs 9.0 oz. (255g).Check the price of the Daniel Defense EZ CAR 7.0 carbine hand guard from Brownells, a name you can trust.

Check out this video on the Brownells AR15 hammer drop block.

Full disclosure: If you purchase from Brownells I will receive a small commission. This will help keep this site online and will not affect the price you pay.

Daniel Defense Omega Rail 12.0 for rifle length piston gas systems

The Daniel Defense Omega Rail 12.0 is a free-floating quad rail system for rifle length piston gas systems with the standard front sight base. The rail is precision engineered from 6061 T-6 aluminum, Type III hard anodized to match the finish of most AR15 receivers. It is designed with additional clearance for the gas piston and a removable top rail to enable access for inspection and maintenance. No permanent modifications to the weapon are necessary and the AR piston rail can be installed in minutes.

You can install the Omega AR rifle rail without removing the gas block employing a flat head-screwdriver and hex key (included). Four Allen-head screws tighten against the barrel nut to lock the rail rock solidly. The Daniel Defense Omega Rail combines with the flat-top of the rifle to provide a great deal of space for flexibility in the mounting of optics.  The combination of four rails gives you the option of mounting fore-grips, bipods, lasers etc. The rail slots are marked alphanumerically to enable replacement of optics without loss of zero. There are plenty of ventilation cuts on the Omega quad rail to keep the weight down and keep the barrel and piston assembly cool. The Omega Rail 12.0 has receptacles for push-button QD sling swivels with built-in rotation limiters. The Omega rail is approximately 113⁄4″ (29.9cm) long. Top Rail – 123⁄8″ (31.4cm) long and the whole assembly weighs 13.6 oz. (386g). All fixings, Allen wrench and instructions are included. This rail is also available in 7.0 carbine and 9.0 mid length versions.

Check the price of the Daniel Defense Omega Rail 12.0 at Brownells, a name you can trust.

You may find this video on the Samson Manufacturing Quick-Flip mount for the Aimpoint 3X Magnifier interesting.

Full disclosure: If you purchase from Brownells I will receive a small commission. This will help keep this site online and will not affect the price you pay.

Daniel Defense Omega Rail 9.0 for rifles with mid length piston gas systems

The Daniel Defense Omega Rail 9.0 is a free-floating quad rail system for mid length piston gas systems with the standard front sight base. The rail is precision engineered from 6061 T-6 aluminum, Type III hard anodized to match the finish of most AR15 receivers. It is designed with additional clearance for the gas piston and a removable top rail to enable access for inspection and maintenance. No permanent modifications to the weapon are necessary and the AR piston rail can be installed in minutes.

You can install the Omega mid-length rail without removing the gas block employing a flat head-screwdriver and hex key (included). Four Allen-head screws tighten against the barrel nut to lock the rail rock solidly. The Daniel Defense Omega Rail combines with the flat-top of the mid-length rifle to provide a gread deal of space for flexibility in the mounting of optics.  The combination of four rails gives you the option of mounting fore-grips, bipods, lasers etc. The rail slots are marked alphanumerically to enable replacement of optics without loss of zero. There are plenty of ventilation cuts on the Omega quad rail to keep the weight down and keep the barrel and piston assembly cool. The Omega Rail 9.0 has receptacles for push-button QD sling swivels with built-in rotation limiters. The Omega rail is approximately 83⁄8″ (21.3cm) long. Top Rail – 9″ (22.9cm) long. 9.6 oz. (273g) wt.. The entire assembly weighs 8 oz. (226g). All fixings, Allen wrench and instructions are included. This rail is also available in 7.0 carbine and 12.0 rifle versions.

Check the price of the Daniel Defense Omega Rail 9.0 at Brownells, a name you can trust.

You may find this video on Eotech holographic sights interesting.

Full disclosure: If you purchase from Brownells I will receive a small commission. This will help keep this site online and will not affect the price you pay.

Daniel Defense Omega Rail 7.0 for carbine length piston gas systems

The Daniel Defense Omega Rail 7.0 is a free-floating quad rail system for carbine length piston gas systems with the standard front sight assembly. The rail is precision engineered from 6061 T-6 aluminum, Type III hard anodized to match the finish of most AR15 receivers. It is designed with additional clearance for the gas piston and a removable top rail to enable access for inspection and maintenance. No permanent modifications to the weapon are necessary and the AR piston rail can be installed in minutes.

You can install the Omega carbine rail without removing the gas block emplying a flat head-screwdriver and hex key (included). Four Allen-head screws tighten against the barrel nut to lock the rail rock solidly. The Daniel Defense Omega Rail combines with the flat-top of the carbine to provide a gread deal of space for flexibility in the mounting of optics.  The combination of four rails gives you the option of mounting fore-grips, bipods, lasers etc. The rail slots are marked alphanumerically to enable replacement of optics without loss of zero. There are plenty of ventilation cuts on the Omega quad rail to keep the weight down and keep the barrel and piston assembly cool. The Omega Rail 7.0 has receptacles for push-button QD sling swivels with built-in rotation limiters. the Omega rail is approximately 63⁄8″ (16.2cm) long, 17⁄8″ (4.8cm) wide, 2½” (6.4cm) and high. The top rail is – 7″ (17.8cm) long. The entire assembly weighs 8 oz. (226g). All fixings, Allen wrench and instructions are included.

Mil-Spec Omega Rail 7.0 model fits AR-15s with carbine-length gas piston systems from Adams Arms, Ares Defense, LWRC International, and Primary Weapons Systems.

Large Diameter Omega Rail 7.0 model has additional internal clearance to accommodate Bushmaster, CMMG, and Patriot Ordnance Factory (POF) carbine-length gas piston systems.

This rail is also available in 9.0 mid-length and 12.0 rifle-length versions.

Check the price of the Daniel Defense Omega Rail 7.0 at Brownells, a name you can trust.

You may find this video on Brownells AR15 upper receiver cleaning kits interesting.

Full disclosure: If you purchase from Brownells I will receive a small commission. This will help keep this site online and will not affect the price you pay.

The Daniel Defense Lite Rail is a lightweight, free-floating quad Picatinny railed handguard. It offers a continuous top rail that aligns with the flat-top to provice a continuous length of rail for alignment of optics. Four rails offer great versatility in placement of accessories such as lasers, flashlights and fore-grips. The DD Lite Rail is machined from 6061 T-6 aluminum and Type III hard anodized. The rail slots are alphanumerically marked to enable accessories to be returned to the same slot when removed for repeat zero. The exclusive Bolt-up system is the same as that used on the Daniel Defence RIS II adopted by United States Special Forces Command for its SOPMOD II program. This replaces the barrel nut and locks the hand guard in place absolutely rigidly with phosphated steel screws. The nut is secured with the Lite Rail Barrel Nut Wrench (available separately). Each hand guard comes complete with a forend, barrel nut, forend attachment base, (6) attachment screws, (3) ladder rail covers, thread locking compound, and instructions. Installation requires removal of barrel and front sight housing. Installation of all models requires use of proprietarybarrel nut wrench which is available separately.

Daniel Defense Lite Rail 4.0 for pistols

DD Lite Rail 4.0 – For use on a 7.5″ barrel with an Adams Arms or Spikes Tactical pistol-length gas piston system. 4″ (10cm) length, 7 oz. (198g) wt.

Daniel Defense Lite Rail 7.0 for carbines

DD Lite Rail 7.0 – Fits carbine-length gas systems; perfect for short barreled rifles. 7.25″ (18.4cm) length, 9 oz. (255g) wt.

Daniel Defense Lite Rail 9.0 for carbines with mid length gas systems

DD Lite Rail 9.0 – Ideal for rifles with mid-length gas systems where size and weight are mission-critical attributes. 9″ (22cm) length, 11 oz. (262g) wt. 

 

Daniel Defense Lite Rail 9.5 FSP for rifles with medium length gas systems

DD Lite Rail 9.5 FSP –Provides extra rail space along sides and bottom with a cut in the top rail for the front sight post and gas block to fit a rifle with a carbine-length gas system.  9.5″ (24cm) length, 9.1 oz. (258g) wt.

Daniel Defense Lite Rail 10.0 for carbine or mid length gas systems with low profile gas blocks

DD Lite Rail 10.0 – Works with a low-profile gas block on either a carbine or mid-length gas system. Installation of all models. 10″ (25cm) length, 11 oz. (287g) wt.

Daniel Defense Lite Rail 12.0 for AR15 and M16 rifles

DD Lite Rail 12.0 – For users who require a light and rugged rifle and desire a tactical upgrade with long-range capability. 12″ (30cm) long, 14 oz. (396g) wt.

Daniel Defense Lite Rail 12.0 FSP for AR15 and M16 rifles.

DD Lite Rail 12.0 FSP – Features a precision cut-out opening in the top rail to accommodate the front sight post and gas block of a carbine with carbine lenght gas system. It provides a rifle length quad rail. 12″ (30cm) long, 14 oz. (396g) wt.

Daniel Defense Lite Rail 12.0 FSPM for mid-length systems

DD Lite Rail 12.0 FSPM – Provides an opening in the top rail for the front sight post and gas block of a mid-length AR15 with mid length gas system. It provides a rifle length quad rail. 12″ (30cm) long, 14 oz. (396g) wt.

Check the price of the Daniel Defense Lite Rail at Brownells, a name you can trust.

You may find this video on the Brownells AR15 combination wrench interesting.

 

Full disclosure: If you purchase from Brownells I will receive a small commission. This will help keep this site online and will not affect the price you pay. Thank you!