Timney 10/22 Drop-in Trigger Review

Posted on November 6, 2012 by admin
Timney 10/22 Drop-in Trigger

Timney 10/22 Drop-in Trigger

The Timney 10/22 Drop-in trigger swaps out the heavy, creepy, inconsistent trigger on the otherwise excellent 10/22 rifle for a creep-free, clean breaking two and a half pound unit. The completely self contained unit comes in a housing precision machined from 6061 aluminum and matte black anodized. The trigger, hammer and sear are wire EDM cut for precision and extreme longevity. To fit you literally just take the rifle out of its stock, push out two pins, pull out the old unit, insert the new one, put the pins back in and put the rifle back into its stock. The experience of shooting your 10/22 will be changed beyond recognition. This unit also comes with an extended magazine release and extended auto bolt release. These units are hand assembled in the U.S.A. for a lifetime of reliable operation. Available with black, silver or red trigger.

Timney 10/22 Drop-in Trigger

Timney 10/22 Drop-in Trigger

Purchase a Timney 10/22 Drop-in Trigger at Brownells, a name you can trust.

Posted in Bolt Releases, Magazine releases, Triggers | Tagged , | Comments Off on Timney 10/22 Drop-in Trigger Review

Precision Reflex Delta Free Float Forearm Review

Posted on November 6, 2012 by admin
Delta Free Float Forearm

Delta Free Float Forearm

The Precision Reflex Delta Free Float Forearm is a development of PRI’s existing range of carbon fiber handguards intended to work with most piston driven AR systems on the market today. The flat bottom also makes this version easier to shoot consistently off a bench. Carbon fiber is extremely light yet very rigid – you can mount your front sight on the top rail with confidence. Using a rifle length forearm on your 16″ carbine length gas system with a low profile gas block will protect your weak hand from touching the carbine’s gas block or barrel as well as giving you a longer sight base for increased accuracy. The unit is easy to install, but installation requires a barrel nut wrench, pin punches and the correct supporting block for your gas block. The Delta Free Float Forearm allows even large diameter barrels to be used.

Features:

  • Triangular configuration
  • Carbon fiber – immense rigidity and light weight
  • Precision machined barrel nut and barrel nut assembly
  • Rifle length, 12-1/2” in length, but may also be used on some 16″ carbines with low profile gas blocks.
  • Matte black finish
  • MIL-STD 1913 Picatinny rails: 8-1/2” top three 3-1/2” rails on the sides and bottom
  • Available for the M4/AR15/M16 and 308 DPMS pattern rifles
  • Fitting instructions included

Benefits:

  • Will accept almost all piston or op-rod systems on the market today (contact PRI if in doubt)
  • Easy to install via PRI’s mounting system
  • Flat bottom makes bench rest shooting easier
Delta Free Float Forearm

Delta Free Float Forearm

Tube – Carbon fiber, black finish. Barrel nut – hard anodized, matte black aluminum. Rifle length – 12-1/2”. Models suit either AR15/M16 or DPMS pattern 308 rifles. Weight – AR15/M16 model: 1.05 lbs. 308 AR model: 1.20 lbs.

Purchase a Delta Gen III Free Float Forearm at Brownells, a name you can trust.

Posted in Rails | Tagged , , , , | Comments Off on Precision Reflex Delta Free Float Forearm Review

Levang Linear Comp

Posted on November 6, 2012 by admin
Levang Linear Comp

Levang Linear Comp

A sound moderator will set you back $200 in transfer tax and put you on a Federal database. If all you want to do is make your 5.56mm/.223 AR more pleasant to shoot and reduce muzzle flip and felt recoil, the Levang Linear Comp is the way to go. It significantly reduces noise at the shooter’s end and is less noisy than a USGI flash hider to shooters at either side of you. Many comps make life unpleasant for adjacent shooters and will make you unpopular at the range. The Levang AR Comp pushes all the noise and blast forward, away from your ears. The unit employs a large expansion chamber ported to the front.

Levang Linear Comp

Levang Linear Comp

SPECS: Material: Matte blue steel finish. Length: 2-1/8″ (5.3cm), Diameter .971″ (24.6mm). Thread: ½”-28 tpi. Only suitable for 5.56mm/.223 caliber.

Purchase a Levang Comp at Brownells, a name you can trust.

Posted in Muzzle Brakes | Tagged , , , | Comments Off on Levang Linear Comp

Spikes Tactical Fake Suppressor Review

Posted on November 5, 2012 by admin
Spikes Tactical Fake Suppressor

Spikes Tactical Fake Suppressor

Not everyone wants the expense and legal hassle of a suppressor and they’re not allowed in twelve states. Now you can have the look of a suppressed 10.5″ barreled carbine without even owning an SBR. The Spikes Tactical Fake Suppressor attaches to a normal profile 16″ barrel using the carbine’s 1/2×28″ muzzle thread.

FEATURES:

  • 1/2×28 threaded for normal M4/16/AR15 .223/5.56mm muzzles on weapons with carbine length gas systems – this unit will NOT fit 9mm uppers which should have a different thread.
  • Unit is correct length for a 16″ AR barrel over which it fits flush
  • Fits up to .720″ profile barrels
  • Length: 5.5″
  • Diameter: 1.25″
  • Weight: 7 oz
  • The unit is CNC machined from solid 6061 aluminum bar stock
  • Matte black anodized finish

BENEFITS:

  • Makes a 16″ AR look like a suppressed 10.5″ barreled carbine
  • Easy to install on most AR15 barrels
  • Gets around the requirement for a BATF stamp and is legal in states and municipalities that do not permit suppressors/silencers.

Purchase a Spikes Tactical Fake Suppressor at Brownells, a name you can trust.

Posted in Muzzle Brakes | Tagged , , | Comments Off on Spikes Tactical Fake Suppressor Review

Precision Reflex Carbon Fiber Forearms Review

Posted on November 5, 2012 by admin
Precision Reflex Carbon Fiber Forearms

Precision Reflex Carbon Fiber Forearms

These are some of the lightest, most durable forearms available for the AR series rifles. The PRI Carbon Fiber Forearms are immensely strong and heat resistant and enhance your weapons’ handling characteristics. They clamp to your upper reciever with a precision engineered aluminum barrel nut. Some models feature generous porting for better cooling. Railed models are available to enable fitting of accessories such as foregrips, flashlights and lasers.

Rifle model fits full-length gas systems in the following configurations:

  • Target with a solid tube devoid of cooling holes for maximum rigidity
  • Ported/Railed with 28 cooling vent holes, three 3½” MIL-STD 1913 rails (repositionable) plus an 8½” top rail for maximum versatility
  • Ported/Non Railed with 34 cooling vent holes for maximum heat dispersion
  • Mid-Length model has 6 vent holes, three 3½” and one 5½” removable MIL-STD 1913 rails.

SPECS: Tube – Carbon fiber, natural black/silver finish. 2″ (5cm) O.D. Barrel nut – matte-black hard anodized aluminum. Rifle – 12½” (31.8cm) long. Mid-Length – 91⁄8″ (23.2cm) long.

Precision Reflex Inc. also offer their PRI Delta forearms for rifles with piston operating systems.

Purchase a Precision Reflex Carbon Fiber Forearm at Brownells, a name you can trust.

Posted in Rails | Tagged , , , , | Comments Off on Precision Reflex Carbon Fiber Forearms Review